Skip to Main
Lowest Price Guarantee - Call Toll Free 800.826.5727

Leaf Eater Original Rain Head

SKU: RH-RHLE99
$39.99
Freight Cost
icon/24/info

Estimated freight cost. Price may vary

$ ———

Specifications

Part NumberRHLE99
Product Weight (lbs)5
ManufacturerRain Harvesting

Shipment

Ships FromIL

Info & Guides

Technical Information
icon/24/pdf-downloadView Technical Drawing

Description

Leaf Eater Original Rain Head

Leaf Eater Original

The Leaf Eater is the ultimate high performance rain head. Not only does it protect the home by preventing gutters from blocking and flooding eaves, the Leaf Eater also improves water quality and reduces tank/cistern maintenance. The Leaf Eater is ideal for use purely as a debris removing device even when rainwater is not being collected. The Leaf Eater incorporates a flow directional gutter outlet which directs the flow of water from the gutter onto the face of the primary screen.

Features and Benefits
Prevents debris entering the tank which improves tank water quality and reduces maintenance
Prevents blocked downspouts which stops the backflow of water into gutters and eaves
Can be mid-mounted on a wall at a convenient height making them easy to access for cleaning
Includes two stainless steel screens:
– 1/4? aperture screen for removal of leaves and debris
– 1/32? aperture preventing mosquitoes and vermin from entering the pipe system and rainwater tank/cistern
Minimal maintenance
Easy to paint
Includes a flow directional rectangular PVC gutter outlet

Installation Instructions

At Gutter Installation

  1. Remove the existing Gutter Outlet from the roof guttering system.
  2. Hold the new Gutter Outlet against the fascia and against the bottom and rear of the gutter where the new outlet hole is to be. Use the Gutter Outlet as a template, draw around the inside of the outlet to mark the underside of the gutter for the new hole and cut out with tin snips. Refit the Gutter Outlet to the main body and place a small amount of sealant in the sealant groove.
  3. Mount the main body of the Leaf Eater Original evenly under the Gutter Outlet by securing it to the fascia with pop rivets or screws, making sure the backing plate fits snug up to the bottom edge of the gutter but NOT between the fascia and back edge of the gutter.
  4. Place the Mozzie Screen in the main body over the Leaf Eater Original outlet ensuring that the screen clips into place. Replace the primary screen, making sure the screen fits INSIDE the front lip of the Leaf Eater Original and secure in place with the clips provided. The Leaf Eater Original is now ready for connection to the downspout. DO NOT glue the Leaf Eater Original to the downspout. SECURE with a screw for easy removal.

Mid-Mount Installation

  • To improve access for cleaning, Leaf Eater Original Rain Heads can be mounted on a wall at a convenient height. When ‘pushing water’ over long runs and depending on the volume of water required to be moved, the Rain Head may need to be mid-mounted more than 4 feet above the discharge point.
  • It is important to note that when mid-mounting, the flow directional benefits of the rectangular gutter outlet supplied with the Leaf Eater Original will be lost. However this is to be balanced with the benefits gained from easier access for maintenance.
  • For mid-mounting, discard the top flow-directional gutter outlet. Cut the entry downspout at 45° allowing 2? clearance between the pipe and the primary screen. This ensures the end of the pipe is parallel to the screen and helps direct the water onto the face of the screen most effectively.